System Status
This chapter describes viewing system status and event log information from the unit's Web Interface.
Click on the Status button to access system and event log information. See the following sections:
Help and Exit buttons also appear on each page of the Web interface; click the Help button to access online help; click the Exit button to exit the application.
For an introduction to the basics of management, see Basic Management.
System Status
The Status tab showing the system status is displayed automatically when you log into the Web Interface. It also is the default window displayed when you click the Status button on the left side of the window.
The Status tab shows the System Status and the System Traps.
System Status
The basic system status is shown in this section, including the version number of the embedded software.
Systems Traps
The status of system traps is shown in this section. System traps occur when the unit encounters irregularities. Deleting system traps has no effect on the operation of the unit. System traps also are sent to an SNMP manager station (if so configured). See "Alarm Traps" in the Tsunami MP.11 Reference Manual for a list and description of the traps.
Event Log
Click the Status button and the Event Log tab to view the contents of your Event Log. The Event Log keeps track of events that occur during the operation of the unit. The Event Log displays messages that may not be captured by System Traps, such as the Transmit Power for the Frequency Channel selected.
See "Event Log Error Messages" in the Tsunami MP.11 Reference Manual for an explanation of messages that can appear in the Event Log.
|
